Home > Picture Hooks & Accessories > Magnetic Hooks & Hangers > Magnetic Hooks for Ceilings
category:

Magnetic Hooks for Ceilings




Magnetic Hook for Ceilings
 
Use: A magnetic hook / hanger is commonly used to hang lightweight objects - such as signs / graphics / displays. Easy to attach (and remove) the magnetic hook onto a steel ceiling strip (e.g. for a suspended ceiling in shops / offices / supermarkets /  window displays etc).
 
Finish: The Magnetic Ceiling Hooks are a white painted metal cased magnet with hook. Attaches well to most ferrous metal surfaces.
 
Sizes: The Magnetic Ceiling Hooks come in 5 sizes:

Small: Ø 16mm (diameter) - support a maximum vertical pull weight of 1kg
Medium: Ø 25mm (diameter) - support a maximum vertical pull weight of 4kg
Large: Ø 32mm (diameter) - support a maximum vertical pull weight of 7kg
X Large: Ø 47mm (diameter) - support a maximum vertical pull weight of 15kg
XX Large: Ø 63mm (diameter) - support a maximum vertical pull weight of 26kg
 
Warning: Holding capacity is the approximate maximum pull rating under ideal conditions. Always carefully test the object you are hanging before fully leaving it free to hang. For best results, use on an indoor, bare (unfinished) metal surface that is smooth and clean. Different metal conditions will affect holding power.
 
Tip: These magnetic hooks can also be used on steel walls / partitions / cabinets. Note the maximum shear capacity weight is typically less than maximum vertical pull weight (as stated above). Always carefully test the object you are hanging before fully leaving it free to hang.
 
Tip: These magnetic hooks can be used with Clear Vertical Hangers with Loop ends